Newmark Structural Engineering Laboratory

Department of Civil and Environmental Engineering

College of Engineering

University of Illinois at Urbana-Champaign

   
 
   
         
 
 
Student Instrumentation Workshop
Machine Shop
Instrumentation
Hydraulic Equipment
Testing Floor
Structural Testing Hardware

Student Instrumentation Workshop

The student instrumentation shop was set up to allow students to use equipment for their experimentation needs.

The Student Instrumentation Workshop was established in September of 2000 and it is located in room 1120 in the Newmark Civil Engineering Laboratory. The shop has been equipped with basic tools to carry out simple operations associated with instrumentation of testing set-ups. Both undergraduate and graduate students can use this shop 24 hours a day, 7 days a week, after adequate training is performed.

 
 
 
 
 
 
 
 

Contact Information

Darold Marrow can usually be found in the CEE shop during the hours of 7:30-4pm.

Procedures for Membership in the Student Instrumentation Worshop

Any student who would like to use the Student Instrumentation Workshop should contact Darold Marrow . The training is provided by CEE Machine Shop personnel. After training has been completed, the student must sign a compliance form .

Directions to become a trained student can be found here.

See also Safety Rules in Student Instrumentation Workshop.

       
  uiuc   The NSEL website is administrated by John Szkolka and Tim Prunkard | Contact NSEL | CEE Home | NEES