Newmark Structural Engineering Laboratory

Department of Civil and Environmental Engineering

College of Engineering

University of Illinois at Urbana-Champaign

   
 
   
         
 
 
Student Instrumentation Workshop
Machine Shop
Instrumentation
      Power Supplies
      Power Supplies & Signal Conditioners
      National Instruments Equipment
      Transducers
            Accelerometers
            LVDTs
            Cable Extension Transducers
            Extensometers
            Structural Health Sensors
            Load Cells
            Temposonics
            Dial Gauges
      Equipment Manuals
Hydraulic Equipment
Testing Floor
Structural Testing Hardware

Trans Tek Series 350 LVDTs

 
Specifications
 
FOR DC-DC OPERATION
Model 0350-0000 0351-0000
Working Range, ± in (mm) 0.050 (1.27) 0.10 (2.54)
Mechanical Travel, in (mm) 0.16 (4.06) 0.31 (7.87)
Input, VDC 6 min to 28 max
Nominal F.S. Output +- VDC (tested with load impedance simulating open circuit)
@ 6 Volt Input 1.2 2.1
@ 15 Volt Input 3.0 5.4
@ 24 Volt Input 5.0 9.0
@ 28 Volt Input 5.6 10.1
Input Current 6.3 mA @ 6 volt input to 48 mA @ 28 volt input
Linearity % Full Scale Total Working Range ± 0.50

Internal Carrier Frequency, Hz

13000 12000
Nominal Greater Than:  
% Ripple, RMS (Nominal) 0.7 0.7
Output Impedance, Ohms 2500 3500
Temperature Range -54°C - 93°C (-65°F - 200°F)
Resolution Infinite
Total Length A, in (mm) 3.01 (76.5) 3.52 (89.4)
Shaft Extension B, in (mm) 0.41 (10.4) 0.56 (14.2)
Tie Force Max, grams 57 170
Weight, grams 200 207
 
  uiuc   The NSEL website is administrated by John Szkolka and Tim Prunkard | Contact NSEL | CEE Home | NEES