30 kip Capacity Load Cells

 
The load cells mentioned below are designed for 30 kip loading capacity. The designation number on each load cell is defined as follows: LC (load cell) - A (aluminum) - # (capacity, kip) - # (consecutive no.) - # (cross section area, in2) - # (inner diameter, in) - # (length, in).
 

Designation Number

Outer Diameter (in)

Excitation Voltage (V)

Resistance for Balance Resistor (kΩ, between...)

Calibration Equation: Calibration Data (VDC)
Uout= UcalA UcalB
LC-A-30-1-1.042-0.765-6.00 1.382 4.00 20 (B and D) .33358F-.00264 0.49 -0.48
LC-A-30-2-1.223-0.612-6.00 1.385 8.00 300 (C and D) .33486F+.05388 1.10 -1.12
LC-A-30-3-1.223-0.612-6.00 1.385 4.00 20 (B and D) .33382F+.01187 0.55 -0.57
LC-A-30-4-1.223-0.612-6.00 1.385 8.00 - .33412F-.00087 1.02 -1.03
LC-A-30-5-1.223-0.612-6.00 1.385 8.00 30 (A and B) 2.9929F-.00272 0.56 -0.58
LC-A-30-6-1.223-0.612-6.00 1.385 8.00 - .33307F-.034841 1.01 -1.01
LC-A-30-7-1.223-0.612-6.00 1.385 8.00 9 (B and D) .33348F-.01493 0.56 -0.56
LC-A-30-8-1.223-0.612-6.00 1.385 8.00 9 (B and D) .33352F-.00814 0.56 -0.56
LC-A-30-9-1.223-0.612-6.00 1.385 8.00 6 (C and D) .33333F-..01902 0.56 -0.57
LC-A-30-10-1.223-0.612-6.00 1.385 8.00 6 (B and D) .33331F-.01677 0.55 -0.55
LC-A-30-11-1.223-0.612-6.00 1.385 8.00 - .35000F-.15000 1.17 1.17