Newmark Structural Engineering Laboratory

Department of Civil and Environmental Engineering

College of Engineering

University of Illinois at Urbana-Champaign

   
 
   
         
 
 
Student Instrumentation Workshop
Machine Shop
Instrumentation
      Power Supplies
      Power Supplies & Signal Conditioners
      National Instruments Equipment
      Transducers
            Accelerometers
            LVDTs
            Cable Extension Transducers
            Extensometers
            Structural Health Sensors
            Load Cells
            Temposonics
            Dial Gauges
      Equipment Manuals
Hydraulic Equipment
Testing Floor
Structural Testing Hardware

50" yo-yo guage

 
The PT101 transducer provides a voltage feedback signal proportional to the position of the traveling stainless steel extension cable.
 
   
     
Specifications
 
Range 0-50 inches
Weight 2 lb. typical
Enclosure Material powder coated or anodized aluminum
Sensor plastic-hybrid precision potentiometer
Electrical Connector MS3102E-14S-6P
Mating Plug MS3102E-14S-6S
Sensing Circuit Options 1 & 3 Input Voltage 14.5 - 50 VDC
Output Voltage 0 - 10 VDC
Sensing Circuit Options 2 & 4 Input Voltage 10.5 - 50 VDC
Output Voltage 0 - 5 VDC
Input Current 10 mA Maximum
Output Impedance 10 ohms Maximum
Output Load 5000 ohms Minimum
Accuracy: ± 0.10 % full stroke
Resolution essentially infinite
Zero and Span Adjustment Range 2:1 turndown
Cable Tension 5 (Ounces ± 30 %)
Max. Cable Acceleration 5 g (Gravitites)
Measuring Cable 0.019-inch dia. nylon-coated stainless steel
Measuring Cable Fitting crimp and swivel
Operating Temperature -40°F to +200°F
Operating Humidity, Splash NEMA 1
Vibration up to 10 G's to 2000 Hz
 
     
  uiuc   The NSEL website is administrated by John Szkolka and Tim Prunkard | Contact NSEL | CEE Home | NEES